Commercial Garage Doors

3600 Series

2" Polyurethane Insulated Thermally Broken Doors
(Models 3602)

The premium Model 3602 is for commercial and industrial facilities where temperature control, energy-efficiency and durability considerations are all important.

Panels are prepainted inside and out to inhibit rust. Hot-dipped, galvanized steel is painted with primer and given a tough oven-baked polyester top coat, to provide the most rust-resistant steel door available. Ten year warranty against rust-through.

FEATURES

  • Full 2" thick sandwich construction consisting of exterior and interior steel skins filled by foamed-in-place polyurethane foam.
  • Both steel skins to be separated by a vinyl thermal break.
  • Clopay's three stage pre-painting process is inside and out for a durable, maintenance-free finish.
  • Stucco embossed exterior steel skin with micro-grooved ribs.
  • Foamed-in-place polyurethane, R value of 17.2, Sectional U value of .058
Rustproof
Commercial Garage Doors Rustproof

Ribbed Panel Design

Quality Assurance - Door shall be insulated steel sectional overhead type as manufactured for Clopay Building Products. Each door is provided as one complete unit including sections, brackets, tracks, counterbalance mechanisms, hardware (list options) to suit the opening and headroom available. Standard maximum size is 26'2 wide x 20' high.

Materials and Construction - Sections shall be 1 3/4 thick sandwich construction consisting of exterior and interior steel skins filled by foamed-in place polyurethane foam. Both steel skins to be separated by a continuous foam thermal break. Section warranted against delamination for 10 years. Steel skins shall be roll formed commercial quality hot-dipped galvanized per ASTM A-294. A-653, phosphate coated, pre-painted with primer and baked-on polyester top coat. Door sections construction of .0175" min. (26 gauge) exterior and .0175" min. (26 gauge) interior skins. To be stucco emboss texture exterior and interior with .040" minor rib, 4" or 5" on center. End stiles shall be exterior steel skin. All stiles are engineered for easy hardware attachment through pre-punched holes, double end stiles as required. Dual continuous hinge back-up strip, pre-punched for hinge attachment. Full length vinyl astragal retainer with U-shaped flexible PVC vinyl. Section join to form weather tight tongue and groove join. High density plastic step plate/life handle provided on bottom sections.

Energy Values - Section: U = .058; R= 17.2; Installed tested R = 7.57*

Finish - The section exterior and interior is pre-painted steel consisting of a hot-dipped galvanized coating applied to the base metal. A phosphate treatment is applied before a baked-on primer. This prime coat is finished with a polyester coat for rust protection. The interior portion of the skin that in adhered to the polyurethane foam is a baked-on coating. Doors are available in white or brown exterior finish. FINISH GURANTEED AGAINST RUST-THROUGH FOR A FULL TEN (10) YEARS.

Hardware - All hinges and brackets to be manufactured of hot-dipped galvanized steel, 14-gauge minimum. Ten ball steel rollers to be full floating ball bearing in case-hardened steel races, mounted to fit the taper of the track.

Tracks - 2" or 3" track. Vertical tracks to be minimum of 1 gauge galvanized steel tapered and mounted for wedge type closing. Horizontal tracks to be minimum 14-gauge galvanized steel, reinforced with minimum 13-gauge galvanized steel angels as required 3" tracks is 12-gauge.

Spring Counterbalance - Door assembly to be operated by a torsion spring counterbalance mechanism with a helically wound, oil tempered torsion spring mounted on a galvanized steel tube or solid steel shaft as required. Cable drums are die cast aluminum with high strength aircraft cable with minimum 7 to 1 safety factor.

Locking - Inside spring loaded slide bolt lock on end stile shall engage slot in track.

Wind Loading - Contact factory for specific wind loading requirements

OPTIONS

  1. Glazing - 24" x 8" or 24" x 12" window lites of cellular PVC frame construction: ¾" insulated glass. Full cushion section, pre-painted white or brown; glazing options include 1/8" DSB, 1/8" Plexiglas, ¼" wire or tempered glass, and 7/16" insulated glass.
  2. High Cycle Spring - Available in 25,000; 50,000 or 100,000 cycle.
  3. Track - Vertical lift, high lift, follow the roof slope and low headroom track available, 2" or 3" as required
  4. Weatherstripping - complete perimeters seals available in various materials.
  5. Locking - Five pin cylinder lock with outside key, 16 ½" lock bar.
  6. Mullions - Carry away (2") up to 14' high, roll-away up to144' high, and swing - up available (consult factory)
  7. Pass Door - 32" Wide x 80" high, maximum 14'2" wide section.
  8. Installation - Install door including sections, brackets, guides, tracks, etc. in accordance with final shop drawings (if required) and instruction by Clopay Building Products Company.
MODEL 3602
WINDOW OPTIONS
(24" x 8" or 24" x 12" Windows)
SECTION ARRANGEMENT
Door Width Max # of Window Lites Door Height # of Sections
Up to 9'2" 2 6'3" to 8'0" 4
9'4" to 12'2" 3 8'3" to 10'0" 5
12'3" to 16'2 " 4 10'3" to 12'0" 6
16'4" to 20'2" 5 12'3" to 14'0" 7
20'4" to 24'2" 6 14'3" to 16'0" 8
24'4" to 27'2" 7 16'3" to 18'0" 9
18'3" to 20'0" 10

Commercial Garage Doors Model 36031-3/4" Polyurethane Insulated Thermally Broken Doors (Model 3603)

The premium 3603 is for commercial industrial facilities where temperature control, energy-efficiency and durability considerations are all important.

Panels are prepainted inside and out to inhibit rust. Hot-dipped, galvanized steel is painted with primer and given a tough oven-baked polyester top coat, to provide the most rust-resistant steel door available. Ten year warranty against rust-through.

FEATURES

  • Full 1 3/4" thick sandwich construction consisting of exterior and interior steel skins filled by foamed-in-place polyurethane foam.
  • Both steel skins to be separated by a vinyl thermal break.
  • Clopay's three stage pre-painting process is inside and out for a durable, maintenance-free finish.
  • Stucco embossed exterior steel skin with micro-grooved ribs.
  • Foamed-in-place polyurethane, R value of 15.04, Sectional U value of .066
Rustproof
Commercial Garage Doors Rustproof

Ribbed Panel Design

Quality Assurance - Door shall be insulated steel sectional overhead type as manufactured for Clopay Building Products. Each door is provided as one complete unit including sections, brackets, tracks, counterbalance mechanisms, hardware (list options) to suit the opening and headroom available. Standard maximum size is 26'2 wide x 20' high.

Materials and Construction - Sections shall be 1 ¾" thick sandwich construction consisting of exterior and interior steel skins filled by foamed-in place polyurethane foam. Both steel skins to be separated by a continuous foam thermal break. Section warranted against delamination for 10 years. Steel skins shall be roll formed commercial quality hot-dipped galvanized per ASTM A-294. A-653, phosphate coated, pre-painted with primer and baked-on polyester top coat. Door sections construction of .0175" min. (26 gauge) exterior and .0175" min. (26 gauge) interior skins. To be stucco emboss texture exterior and interior with .040" minor rib, 4" or 5" on center. End stiles shall be exterior steel skin. All stiles are engineered for easy hardware attachment through pre-punched holes, double end stiles as required. Dual continuous hinge back-up strip, pre-punched for hinge attachment. Full length vinyl astragal retainer with U-shaped flexible PVC vinyl. Section join to form weather tight tongue and groove join. High density plastic step plate/life handle provided on bottom sections.

Energy Values
Section: U = .66; R= 15.05; Installed tested R = 6.97*

Finish - The section exterior and interior is pre-painted steel consisting of a hot-dipped galvanized coating applied to the base metal. A phosphate treatment is applied before a baked-on primer. This prime coat is finished with a polyester coat for rust protection. The interior portion of the skin that in adhered to the polyurethane foam is a baked-on coating. Doors are available in white or brown exterior finish. FINISH GURANTEED AGAINST RUST-THROUGH FOR A FULL TEN (10) YEARS.

Hardware - All hinges and brackets to be manufactured of hot-dipped galvanized steel, 14-gauge minimum. Ten ball steel rollers to be full floating ball bearing in case-hardened steel races, mounted to fit the taper of the track.

Tracks - 2" or 3" track. Vertical tracks to be minimum of 16-gauge galvanized steel tapered and mounted for wedge type closing. Horizontal tracks to be minimum 14-gauge galvanized steel, reinforced with minimum 13-gauge galvanized steel angels as required 3" tracks is 12-gauge.

Spring Counterbalance - Door assembly to be operated by a torsion spring counterbalance mechanism, with a helically wound, oil tempered torsion spring mounted on a galvanized steel tube or solid steel shaft as required. Cable drums are die cast aluminum with high strength galvanized aircraft cable with minimum 7 to 1 safety factor.

Locking - Inside spring loaded slide bolt lock on end stile shall engage slot in track.

Wind Loading - Contact factory for specific wind loading requirements

OPTIONS

  1. Glazing - 24" x 8" or 24" x 12" window lites of cellular PVC frame construction: ¾" insulated glass. Full cushion section, pre-painted white or brown; glazing options include 1/8" DSB, 1/8" Plexiglas, ¼" wire or tempered glass, and 7/16" insulated glass.
  2. High Cycle Spring - Available in 25,000; 50,000; 100,000 cycle.
  3. Joint Seal - Available durable compression seal can be field applied to stop air infiltration.
  4. Track - Vertical lift, high lift, follow the roof slope and low headroom track available. 2 or 3" as required.
  5. Weatherstripping - Complete perimeter seals available in various materials.
  6. Locking - Five pin cylinder lock with outside key, 16-1/2" lock bar.
  7. Mullions - Carry away (2") up to 14' high, roll-away up to144' high, and swing up available (consult factory)
  8. Pass Door - 32" Wide x 80" high, maximum 14'2" wide section.
  9. Installation - Install door including sections, brackets, guides, tracks, etc. in accordance with final shop drawings (if required) and instructions by Clopay Building Products Company.
MODEL 3603
WINDOW OPTIONS SECTION ARRANGEMENT
Door Width Max # of Window Lites Door Height # of Sections
Up to 9'2" 2 6'3" to 8'0" 4
9'4" to 12'2" 3 8'3" to 10'0" 5
12'3" to 16'2" 4 10'3" to 12'0" 6
16'4" to 20'2" 5 12'3" to 14'0" 7
20'4" to 24'2" 6 14'3" to 16'0" 8
24'4" to 27'2" 7 16'3" to 18'0" 9
18'3" to 20'0" 10